HOW IT WORKS
Tex Remover soaks through and softens emulsion and vinyl silk paint and *Artex type interior
textured coatings ready for easy removal. This allows easy removal from the substrate.
|
HOW TO GET THE BEST RESULTS |
|
1. |
Protect all areas not to be stripped, including textiles, polished wood surfaces and
gloss paint from drips or spillages. |
|
2. |
Apply Tex Remover generously with paintbrush. DO NOT BRUSH OUT. |
|
3. |
Where painted, allow to soak for 30 to 40 minutes. Check a small area with a
scraper. DO NOT ALLOW TO DRY OUT. Reactivate with warm water if drying
occurs. |
|
4. |
Remove wet softened coating with a scraper. |
|
5. |
Apply a further generous coat of Tex Remover with a paintbrush. |
|
6. |
Allow to soak for 15 to 20 minutes. Check a small area with a scraper. DO NOT
ALLOW TO DRY OUT. (If product dries, spray with warm water to reactivate.) |
|
7. |
Remove wet softened coating with a scraper, taking care not to damage underlying
surface. |
|
8. |
Should any coating remain - repeat the process. |
|
9. |
Wash down with water, using a cloth or sponge. |
|
10. |
Ensure no trace of remover remains. |
|
11. |
Allow to dry before redecorating. |
|
12. |
Wash hands after use. |
|
COVERAGE
1 litre covers from 2 - 4 square metres.
2.5 litres covers up to 10 square metres.
5 litres covers up to 20 square metres.
NOTE
Some textured coatings may smell unpleasant when disturbed, but do not generally
give off dangerous vapours. Ensure adequate ventilation.
|
CAUTION:
|
|
Wear protective goggles when working overhead.
|
Wear impervious gloves to remove softened coating.
|
If textured material contains asbestos, relevant regulations apply.
|
Prolonged contact with TEX REMOVER will remove gloss paint.
|
Whilst Action Products Limited has taken every care to ensure accuracy of the data
contained in this document; no guarantee or liability will be assumed.
|
|
It is recommended that customers satisfy themselves of the suitability of all product
purchased for their own use.
|
STORAGE
Keep container securely closed. Store out of direct sunlight. Protect from frost.
DISPOSAL OF WASTE
Collect waste for disposal.
|
|
N.B. Unless you are certain that the coating removed was manufactured after 1985, the waste should be treated as asbestos waste.
|
|
If paint removed contained lead, then the waste material will contain lead. |
|
Relevant regulations will apply. |
|
Please contact the local authority re disposal. |
|
* Artex is the trademark of BPB UK Limited |
PURCHASE INFORMATION
All our products can be purchased from Action Products Ltd. via mail order,
Tel: Tel: 01454 228702 Fax: 01454 228703 e-mail: Info@action-products.co.uk
Or in person from one of our retail outlets
DESIGNED TO BE KIND
All chemicals and chemical compounds used by Action Products conform to European
guidance to the Public Sector on procuring “green” products and services.
|
[
Top ]
[
Home ]
[
How to ]
[
Products ]
[
Purchase ]
[
Site map ]
|
|
Dear Customers,
The word Safe has been changed to Safer*.
All products are SAFER* than products based on highly flammable methylal or toxic methanol.
This change is to comply with European Advertising regulation requirements.
Our products remain the same fast acting, non-toxic, low odour products which have been enjoyed by our customers since 1998.
Thank you for your continued custom and support.
Best wishes,
Action Products Ltd.
Aug. 2012
|
